At Car-Aid we have been in the industry for over 50 years and the current staff has an accumulated knowledge of over 65 year experience and in this time have learned a lot in the ways of engine assembly. We have put together some very interesting combinations to make engines as reliable and powerful as a customer has desired, from vintage engines requiring modern replacement bearings and fully filtered oiling systems to all out drag and drift combos that have made a definite mark in their field. It all starts and ends at the engine assembly. To ensure the best results we use the latest technology to measure everything from the surface finish on the gasket faces to digitally calibrated torque wrenches and stretch gauges to provide the optimum clapping loads. Everything is double/triple measured to within .001mm to make sure that manufactures tolerances and clearances are adhered to and there by providing the best result for a well built and reliable engine for our client. Engine AssemblyWe recommend using some of the highest quality components in the business. If you’re after power and reliability it’s better to spend a little more in the knowledge that your engine has the capabilities to withstand any extra unforeseen forces that you may be subjecting it to. We have dedicated one side of our workshop solely to engine assembly, where there is more than sufficient natural light and away from all the dust and grime that is involved in machining an engine. Components